
ANT16 Hardware Specification

Asynchronous Sample Rate |
500MHz maximum, 100Hz minimum. 5-2.5-1 sequence |
Channels |
16, numbered 0 to 15 |
Memory Depth |
2048 samples |
Threshold |
0.8V to 2.5V, in steps of 0.1V |
Minimum Input |
0.5V below threshold for Lo, 0.5V above threshold for Hi |
Trigger Connections |
Trigger In and Trigger Out. Trigger In is only available in asynchronous clocking mode (using the internal clock). In synchronous clocking mode, this connection becomes Clock In. |
Input Skew |
Less than 2ns, channel to channel |
Input Impedance |
100Kohms in parallel with 10pF |
Maximum Input Voltages |
+40V down to -40V |
Conditions |
0, 1, Rising Edge, Falling Edge, Either Edge, and DON'T CARE for all channels |
Pattern Recognisers |
2 |
Edges |
Trigger on the condition becoming TRUE or on the condition becoming FALSE |
Pass Count |
0 to 1023 |
Trigger Logic |
Multi-state trigger logic with Edge, Pattern, and Complex triggering. Complex triggering includes occurrence counting and minimum and maximum duration measurement |
Trigger Position |
10% to 90% of buffer, in 10% steps |
Operating Temperature |
5°C to 40°C |
Storage Temperature |
-40°C to 75°C |
Size |
65 mm x 35mm x 15mm (2.5" x 1.4" x 0.6") |
Power Consumption |
2.2W maximum |
Power Source |
Via USB cable. No external power supply |
Computer Connection |
USB connection to computer. Includes an attached USB cable |
Host Computer |
Logic Analyzer front panel software included for Windows 98/ME/2000/XP |
Print Waveforms |
Yes |
Data Output |
Text File and CSV File |
Cursors |
1 main cursor plus 1 auxiliary cursor |
 |