ES-U-1001-R10 : Premium ** GOLD ** USB-RS232 Adapter cable ( 10cm )

C232R-03
Larger picture

1+   = $22.50 each
5+   = $21.38 each
10+ =  P.O.A.

 

  • Special high gloss white finish enclosure design
  • Looks and works great with MAC, PC and Linux platforms
  • Enhanced RS232 transciever gives serial port speed of up to 1000K bps
  • Adds one RS-232 serial port by connecting to USB port
  • Installed as standard Windows COM port
  • FIFO: 128 byte transmit buffer 384 byte receive buffer
  • Works with USB 1.1 & 2.0 host port
  • One DB9 male connector
  • Serial Communication Parameters
     -Parity: None, Even, Odd
     -Data bits: 7, 8
     -Flow control: RTS/CTS , DSR/DTR, X-ON/  X-OFF, None

 

  • Gold plated USB and DB9 connectors for enhanced connection reliability
  • Side-lit blue RX and TX traffic indicators
  • integral 10cm USB cable with moulded strain relief
  • Quality 4-layer pcb design
  • COM Port Number can be changed to COM1 to COM4 to support HyperTerminal, or any other COM port number required
  • Uses latest FTDI "R" type chip set & drivers for maximum compatibility
  • Supports Windows XP, 2003, 2000, ME, 98, Linux, MAC-OS8,9,X
  • Full RS-232 modem control signals
  •  RS-232 data signals: TxD, RxD, RTS, CTS, DSR, DTR, DCD, RI, GND
  •  Powered by USB port. No external power adapter required.

    • ES-U-1001-R is our new premium USB to RS232 adapter cable. This new design sets the standards in appearance and functionality with its high gloss white enclosure and side-lit blue traffic indicators designed to appeal to discerning PC and MAC users alike. For additional connection reliability, both the USB connector and DB9 serial connector are gold plated. Based on the very latest FTDI "R" series chip set technology the ES-U-1001-R  offers outstanding performance and quality at a remarkable price. The ES-U-1001-R  is supplied in full retail packaging including driver CD.
    MAC users will be pleased to note that the ES-U-1001-R  supports the new Intel based platforms as well as the traditional Power PC based models.

     

    ES-U-1001-R100 : Premium ** GOLD ** USB-RS232 Adapter cable ( 100cm )

    C232R-03
    Larger picture

    1+   = $24.98 each
    5+   = $23.73 each
    10+ =  P.O.A.

     

    • Special high gloss white finish enclosure design
    • Looks and works great with MAC, PC and Linux platforms
    • Enhanced RS232 transciever gives serial port speed of up to 1000K bps
    • Adds one RS-232 serial port by connecting to USB port
    • Installed as standard Windows COM port
    • FIFO: 128 byte transmit buffer 384 byte receive buffer
    • Works with USB 1.1 & 2.0 host port
    • One DB9 male connector
    • Serial Communication Parameters
       -Parity: None, Even, Odd
       -Data bits: 7, 8
       -Flow control: RTS/CTS , DSR/DTR, X-ON/  X-OFF, None

     

  • Gold plated USB and DB9 connectors for enhanced connection reliability
  • Side-lit blue RX and TX traffic indicators
  • integral 100cm USB cable with moulded strain relief
  • Quality 4-layer pcb design
  • COM Port Number can be changed to COM1 to COM4 to support HyperTerminal, or any other COM port number required
  • Uses latest FTDI "R" type chip set & drivers for maximum compatibility
  • Supports Windows XP, 2003, 2000, ME, 98, Linux, MAC-OS8,9,X
  • Full RS-232 modem control signals
  •  RS-232 data signals: TxD, RxD, RTS, CTS, DSR, DTR, DCD, RI, GND
  •  Powered by USB port. No external power adapter required.

    • ES-U-1001-R is our new premium USB to RS232 adapter cable. This new design sets the standards in appearance and functionality with its high gloss white enclosure and side-lit blue traffic indicators designed to appeal to discerning PC and MAC users alike. For additional connection reliability, both the USB connector and DB9 serial connector are gold plated. Based on the very latest FTDI "R" series chip set technology the ES-U-1001-R  offers outstanding performance and quality at a remarkable price. The ES-U-1001-R  is supplied in full retail packaging including driver CD.
    MAC users will be pleased to note that the ES-U-1001-R  supports the new Intel based platforms as well as the traditional Power PC based models.

    ES-U-1001-B10 Budget USB-RS232 Adapter cable ( 10cm )
    ChiPi2
    Larger picture

    1+   = $18.48 each
    5+   = $17.56 each
    10+ =  P.O.A.

     

    • Nicely sculpted white finish enclosure design
    • Adds one RS-232 serial port by connecting to USB port
    • Installed as standard Windows COM port
    • FIFO: 128 byte transmit buffer 384 byte receive buffer
    • Works with USB 1.1 & 2.0 host port
    • One DB9 male connector
    • Serial Communication Parameters
       -Parity: None, Even, Odd
       -Data bits: 7, 8
       -Flow control: RTS/CTS , DSR/DTR, X-ON/  X-OFF, None
    • integral 10cm USB cable with moulded strain relief
    • Works great with MAC, PC and Linux platforms
    • Serial port speed of up to 250K bps
    • COM Port Number can be changed to COM1 to COM4 to support HyperTerminal, or any other COM port number required
    • Uses latest FTDI "R" type chip set & drivers for maximum compatibility
    • Supports Windows XP, 2003, 2000, ME, 98, Linux, MAC-OS8,9,X
    • Full RS-232 modem control signals
    •  RS-232 data signals: TxD, RxD, RTS, CTS, DSR, DTR, DCD, RI, GND
    •  Powered by USB port. No external power adapter required.

    ES-U-1001-B is our new budget USB to RS232 adapter cable. Despite the low price ES-U-1001-B features a nicely sculpted white enclosure design that both looks and feels good. Based on the very latest FTDI "R" series chip set technology the ES-U-1001-B offers outstanding performance and quality at a remarkable price. The ES-U-1001-B is supplied bulk packed ( i.e cable only - packaged in an anti static bag ) - drivers can be easily downloaded from the internet or automatically from Microsoft via Windows XP Product Update service.
    MAC users will be pleased to note that the ES-U-1001-B supports the new Intel based platforms as well as the traditional Power PC based models.

    ES-U-1001-A : USB-RS232 with detachable USB cable
    ** Special promotional offer **
    us232xc
    Larger picture

     

     

    • Attractive translucent plastic design
    • Serial port speed of up to 230K bps
    • Adds one RS-232 serial port by connecting to USB port
    • Installed as standard Windows COM port
    • FIFO: 128 byte transmit buffer 384 byte receive buffer
    • Works with USB 1.1 & 2.0 host port
    • One DB9 male connector
    • Serial Communication Parameters
       -Parity: None, Even, Odd
       -Data bits: 7, 8
       -Flow control: RTS/CTS , DSR/DTR, X-ON/  X-OFF, None

     

    • Detachable 10cm USB cable
    • RxD, TxD LEDs for monitoring port status & easy diagnostics
    • COM Port Number can be changed to COM1 to COM4 to support HyperTerminal, or any other COM port number required
    • Industry Standard FTDI chip set & drivers for maximum compatibility
    • Supports Windows XP, 2003, 2000, ME, 98, Linux, MAC-OS8,9,X
    • Full RS-232 modem control signals
    •  RS-232 data signals: TxD, RxD, RTS, CTS, DSR, DTR, DCD, RI, GND
    •  Powered by USB port. No external power adapter required.

     DOWNLOAD USER MANUAL

    ES-U-1001-A can plug directly into a unused USB port using it's inbuilt USB "A" plug where space permits. A short 10cm detachable USB extension cable allows the ES-U-1001-A to be used where connector spacing does not allow the ES-U-1001-A to be inserted directly. 

    ES-U-1001-A features a full set of RS-232 modem data and control signals (TxD, RxD, RTS, CTS, DSR, DTR, DCD, RI, and GND) on it's PC compatible DB9 male connector and has an internal 128 byte transmit buffer FIFO and a 384 byte receive buffer FIFO. It supports RS232 data transfer rates of up to 230K bps. No external power supply is required as ES-U-1001-A takes it's power from the USB bus.

    ES-U-1001-A comes complete with drivers for Microsoft Windows '98, Windows ME, Windows 2000, and Windows XP. The Windows XP drivers are fully WHQL certified. Also included are drivers for Apple OS8, OS9 and OSX. Linux kernel 2.4.20 or greater includes also USB drivers for this product

    ES-U-1001-C100 : Premier USB-RS232 Adapter cable
    us232b
    Larger picture

    1+   = $29.95 each
     5+   = $28.45 each
    10+ = $27.70 each
    25+ = $26.96 each
    50+ = P.O.A.

     

    • Attractive translucent plastic design
    • Enhanced RS232 transciever gives serial port speed of up to 500K bps
    • Adds one RS-232 serial port by connecting to USB port
    • Installed as standard Windows COM port
    • FIFO: 128 byte transmit buffer 384 byte receive buffer
    • Works with USB 1.1 & 2.0 host port
    • One DB9 male connector
    • Serial Communication Parameters
       -Parity: None, Even, Odd
       -Data bits: 7, 8
       -Flow control: RTS/CTS , DSR/DTR, X-ON/  X-OFF, None
    • RxD, TxD LEDs for monitoring port status & easy diagnostics

     

    • integral 1m USB cable with moulded strain relief
    • Quality 4-layer pcb design
    • COM Port Number can be changed to COM1 to COM4 to support HyperTerminal, or any other COM port number required
    • Industry Standard FTDI chip set & drivers for maximum compatibility
    • Supports Windows XP, 2003, 2000, ME, 98, Linux, MAC-OS8,9,X
    • Full RS-232 modem control signals
    •  RS-232 data signals: TxD, RxD, RTS, CTS, DSR, DTR, DCD, RI, GND
    •  Powered by USB port. No external power adapter required.

    The ES-U-1001-C100 USB to RS232 converter cable is housed in an attractive translucent blue enclosure with a 1m tethered (fixed) USB cable. It is ideally suited to consumer and light industrial applications. ES-U-1001-C100 adds a Windows serial Com port via it's USB connection and is compatible with new & legacy RS-232 devices. USB Plug and Play allows easy serial port expansion and requires no IRQ, DMA, or I/O port resources.

    ES-U-1001-C100 features a full set of RS-232 modem data and control signals (TxD, RxD, RTS, CTS, DSR, DTR, DCD, RI, and GND) on it's PC compatible DB9 male connector. ES-U-1001-C100 has an internal 128 byte transmit buffer FIFO and a 384 byte receive buffer FIFO. It supports RS232 data transfer rates of up to 500K bps. No external power supply is required as ES-U-1001-C100 takes it's power from the USB bus.

    ES-U-1001-C100 comes complete with drivers for Microsoft Windows '98, Windows ME, Windows 2000 and Windows XP. Drivers are also available for Apple OS-8, OS-9 and OS-X as well as Linux.

    ES-U-1001-C10 : Premier USB-RS232 Adapter cable
    us232blc
    Larger picture

    1+   = $28.95 each
     5+   = $27.50 each
    10+ = $26.78 each
    25+ = $26.06 each
    50+ = P.O.A.

     

    • Attractive translucent plastic design
    • Enhanced RS232 transciever gives serial port speed of up to 500K bps
    • Adds one RS-232 serial port by connecting to USB port
    • Installed as standard Windows COM port
    • FIFO: 128 byte transmit buffer 384 byte receive buffer
    • Works with USB 1.1 & 2.0 host port
    • One DB9 male connector
    • Serial Communication Parameters
       -Parity: None, Even, Odd
       -Data bits: 7, 8
       -Flow control: RTS/CTS , DSR/DTR, X-ON/  X-OFF, None
    • RxD, TxD LEDs for monitoring port status & easy diagnostics

     

    • integral 10cm USB cable with moulded strain relief
    • Quality 4-layer pcb design
    • COM Port Number can be changed to COM1 to COM4 to support HyperTerminal, or any other COM port number required
    • Industry Standard FTDI chip set & drivers for maximum compatibility
    • Supports Windows XP, 2003, 2000, ME, 98, Linux, MAC-OS8,9,X
    • Full RS-232 modem control signals
    •  RS-232 data signals: TxD, RxD, RTS, CTS, DSR, DTR, DCD, RI, GND
    •  Powered by USB port. No external power adapter required.

    Many customers have asked us for a version of our popular ES-U-1001-C100 cable in a compact format specifically designed to tuck into the limited space available in their notebook / laptop carrying case. Well here it is, featuring a short 4in (10cm) cable and drivers on a mini-CD. Apart from these, specifications are the same as our full size ES-U-1001-C100 USB-RS232 adapter. 

    ES-U-1001-C10 features a full set of RS-232 modem data and control signals (TxD, RxD, RTS, CTS, DSR, DTR, DCD, RI, and GND) on it's PC compatible DB9 male connector. ES-U-1001-C10 has an internal 128 byte transmit buffer FIFO and a 384 byte receive buffer FIFO. It supports RS232 data transfer rates of up to 500K bps. No external power supply is required as ES-U-1001-C10 takes it's power from the USB bus.

    ES-U-1001-C10 comes complete with drivers for Microsoft Windows '98, ME, 2000, XP and Server 2003. Drivers are also available for Apple OS-8, OS-9 and OS-X as well as Linux

    ES-U-1001 : Single Port Enclosure Style Converter
    usbcom
    Larger picture

    1+   = $24.45 each
     5+   = $23.23 each
    10+ = $22.62 each
    25+ = $22.01 each
    50+ = P.O.A.

     

    • Serial port speed of up to 230K bps
    • Adds one RS-232 serial port by connecting to USB port
    • Installed as standard Windows COM port
    • FIFO: 128 byte transmit buffer 384 byte receive buffer
    • Works with USB 1.1 & 2.0 host port
    • One DB9 male connector
    • Serial Communication Parameters
       -Parity: None, Even, Odd
       -Data bits: 7, 8
       -Flow control: RTS/CTS , DSR/DTR, X-ON/  X-OFF, None
    • RxD, TxD LEDs for monitoring port status & easy diagnostics

     

    • Detachable 0.8m USB cable
    • COM Port Number can be changed to COM1 to COM4 to support HyperTerminal, or any other COM port number required
    • Industry Standard FTDI chip set & drivers for maximum compatibility
    • Supports Windows XP, 2003, 2000, ME, 98, Linux, MAC-OS8,9,X
    • Full RS-232 modem control signals
    •  RS-232 data signals: TxD, RxD, RTS, CTS, DSR, DTR, DCD, RI, GND
    •  Powered by USB port. No external power adapter required.

     DOWNLOAD USER MANUAL

    The ES-U-1001 converter is housed in a strong plastic enclosure - it is designed for more rugged application areas than the cable types. ES-U-1001 adds a Windows serial Com port via it's USB connection and is compatible with new & legacy RS-232 devices. USB Plug and Play allows easy serial port expansion and requires no IRQ, DMA, or I/O port resources.

    ES-U-1001 features a full set of RS-232 modem data and control signals (TxD, RxD, RTS, CTS, DSR, DTR, DCD, RI, and GND) on it's PC compatible DB9 male connector. ES-U-1001 has an internal 128 byte transmit buffer FIFO and a 384 byte receive buffer FIFO. It supports RS232 data transfer rates of up to 230K bps. No external power supply is required as ES-U-1001 takes it's power from the USB bus.

    ES-U-1001 comes complete with drivers for Microsoft Windows '98, Windows ME, Windows 2000 and Windows XP. Drivers are also available for Apple OS-8, OS-9 and OS-X as well as Linux.

    ES-U-1001-D25 : Single Port Enclosure Style Converter
    usbcom25
    Larger picture

    1+   = $30.95 each
     5+   = $29.40 each
    10+ = $28.63 each
    25+ = $27.86 each
    50+ = P.O.A.

     

    • Serial port speed of up to 230K bps
    • Adds one RS-232 serial port by connecting to USB port
    • Installed as standard Windows COM port
    • FIFO: 128 byte transmit buffer 384 byte receive buffer
    • Works with USB 1.1 & 2.0 host port
    • One DB25 male connector
    • Serial Communication Parameters
       -Parity: None, Even, Odd
       -Data bits: 7, 8
       -Flow control: RTS/CTS , DSR/DTR, X-ON/  X-OFF, None
    • RxD, TxD LEDs for monitoring port status & easy diagnostics

     

    • Detachable 0.8m USB cable
    • COM Port Number can be changed to COM1 to COM4 to support HyperTerminal, or any other COM port number required
    • Industry Standard FTDI chip set & drivers for maximum compatibility
    • Supports Windows XP, 2003, 2000, ME, 98, Linux, MAC-OS8,9,X
    • Full RS-232 modem control signals
    •  RS-232 data signals: TxD, RxD, RTS, CTS, DSR, DTR, DCD, RI, GND
    •  Powered by USB port. No external power adapter required.

     DOWNLOAD USER MANUAL

    The ES-U-1001-D25 converter is housed in a strong plastic enclosure it is designed for more rugged application areas than the cable types. ES-U-1001-D25 adds a Windows serial Com port via it's USB connection and is compatible with new & legacy RS-232 devices. USB Plug and Play allows easy serial port expansion and requires no IRQ, DMA, or I/O port resources.

    ES-U-1001-D25 features a full set of RS-232 modem data and control signals (TxD, RxD, RTS, CTS, DSR, DTR, DCD, RI, and GND) on it's PC-XT compatible DB25 male connector. ES-U-1001-D25 has an internal 128 byte transmit buffer FIFO and a 384 byte receive buffer FIFO. It supports RS232 data transfer rates of up to 230K bps. No external power supply is required as ES-U-1001-D25 takes it's power from the USB bus.

    ES-U-1001-D25 comes complete with drivers for Microsoft Windows '98, Windows ME, Windows 2000, and Windows XP. The Windows XP drivers are fully WHQL certified. Also included are drivers for Apple OS8, OS9 and OSX. Linux kernel 2.4.20 or greater includes also USB drivers for this product.